Programmable Electromagnetic detection circuit |
81 Electromagnetic sensor inputs
Automatic conversion sequencer
|
Powerful Hardware Computer Architecture |
8-bit RISC 8051 CPU operate maximum at 24Mhz clock
8x8 Multiplier and 16/8 bits Divider hardware accelerators
Internal power-on reset circuit and watch-dog counter
Programmable UART function
|
Flexible Electromagnetic pen point detection |
Support Passive Type Electromagnetic pen pointer detection |
Flexible On-Chip Memory |
512x8 bits SRAM for data storage
4Kx8 bits ROM for fundamental program
32Kx8 bits embedded-flash for extra program update and calibrated data
|
Support maximum of 14 general purpose input/output (GPIO) |
|
I2C compatible interface |
Compliant to I2C specification v2.1
Support slave device only
Supports standard and fast mode
7-bit device addressing modes
Supports programmable device address selection
|
SPI compatible interface |
Support SPI slave mode only, working frequency @ 3MHz
4-wire interface
SPI mode 0
|
Operation Power |
One power source 3.3 V
Provide one internal power regulator for core power generation
|
Low power consumption |
Active mode : 20 mA
Power Down mode : 50 uA
|
Temperature Range |
-10 ℃ ~ 85 ℃ |
Package
|
144-pin LQFP (81ch, 14 GPIO)
128-pin LQFP (75ch, 9 GPIO)
128-pin BGA (75ch, 9 GPIO)
|